Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Locator supports the deployment of multiple Locator servers, configured to work together to search and index documents from the various data sources within the customer environment. In a multi-server scenario, the secondary Locator search server can be added to the SolrCloud of the primary Locator Search Server to offer distribution of index, replication, failover and load balancing.  You can add as many Secondary Search Servers as you like to the Primary Locator Server depending on the needs and requirements.

Prerequisites

Installing a Locator Secondary Search Server in a multi-server environment

  1. In the Locator Installer choose Custom Install 
  2. On the Server Address page, replace localhost with the primary server hostname for the Licensing service address field
  3. For the Zookeeper address, replace localhost with the primary server IPV4 address and keep the port :9983
  4. If using PostgreSQL, on the Database Information page, leave the drop down as PostgreSQL and the database name as Locator.
  5. If using Microsoft SQL, on the Database Information page, change the drop down as Microsoft SQL Server and fill in the database server hostname, database name and database user account credentials. Click Verify Connection
  6. Choose the following components
  7. Finish the installer and wait for the installation to complete.

Configuring a Locator Secondary Search Server in a multi-server environment

  1. Make sure you have installed and configured the primary Locator Server, see Installing/configuring a Primary Server in a multi-server environment

  2. Add a new rule to the Windows firewall allowing all traffic inbound on TCP port 8983 for Solr.  Run the following from an elevated command prompt.  This command will work on Windows Server 2008 R2 or later:

    netsh advfirewall firewall add rule name="Locator Solr (TPC-In)" protocol=TCP localport=8983 action=allow dir=IN remoteip=xxx.xxx.xxx.xxx,yyy.yyy.yyy.yyy

    Replace xxx.xxx.xxx.xxx and yyy.yyy.yyy.yyy with the IP(s) of the servers involved with the multi server setup. This applies both to servers in a multi server SOLR ViaWorksCloud setup, as well as setups where additional fetch servers are set up.

  3. Postgres only: steps 2-3
    Once installed, stop all Locator services in the specified order.  This can be accomplished either manually, via the Windows Services UI, or from a PowerShell session.

    Windows Services UI Method

    From the Windows Services app, stop each Locator Service in the following order:


        • All Fetch Services, in any order (e.g. ayfie FileServer Fetch Service, ayfie Exchange Fetch Service, etc.)
        • Locator Index Service
        • Locator IndexBuilder Service
        • Locator Licensing Service
        • Locator Database Service


    PowerShell Method

    Paste the following code into an elevated PowerShell session to stop all Locator services:

    # Create an array of Locator service names in the order they should be stopped. Get the fetch services first.
$vwServices= Get-Service | Where { $_.DisplayName -like "*Locator *Fetch*" }

$vwServices= Get-Service | Where { $_.DisplayName -like "*ayfie*Fetch*" }

# These services must be stopped in this order after fetch services are stopped.
$vwServiceNames= @(
"Via.Index.Service",
"Locator IndexBuilder",
"Via.Licensing.Service",
    "Locator DatabaseService"
)
# Add to the array of services for each of the additional services that are NOT fetch services
foreach ($n in $vwServiceNames) {
$vwServices += (Get-Service -Name $n)
}

# Stop each Locator service
$vwServices| ForEach-Object {
Stop-Service $_.Name -Verbose
}

  4. If you used Custom Install Path in the Locator Installer these values should have already been set. Please verify in %ProgramFiles%\ayfie\Locator\Config\DataAccess.config. If the values are still localhost, do the following from an elevated command prompt, first make a backup copy and then edit the file %ProgramFiles%\ayfie\Locator\Config\DataAccess.config

    1. Change the value of the “ViaDatabaseServer” key to reflect the IPv4 address of the Primary Locator server as opposed to the default value of 127.0.0.1.

    2. Add this line before the </appSettings> line:

      <add key="LicensingServiceServer" value="<IPv4_addr>" />


      Where       <IPv4_addr> is the IPv4 address of the Primary Locator server.


  5. Edit the REST Service web.config: "[Drive]:\Program Files\ayfie\Locator\RestService\web.config": change <add key="LicenseHostName" value="localhost" /> to <add key="LicenseHostName value="FQDN_of_primary_server" />. Use "[Drive]:\Program Files\ayfie\Locator\RestService\Custom\web_config_overrides.config" to persist change through upgrades, see How do override files work?

  6. Verify that the REST Service web.config "[Drive]:\Program Files\ayfie\Locator\RestService\web.config": AuthorityServiceBaseUrl key reflect the FQDN of the primary Locator Server. The Locator installer sets this value.

  7. Disable all non-fetch Locator services except the Locator Index Service by executing the command in an elevated PowerShell session:

    $fetchServices= Get-Service | Where {$_.DisplayName -like "*Locator*" -and $_.DisplayName -notlike "*Locator*Fetch*" -and $_.DisplayName -notlike "*Index Service*"}
$fetchServices| Set-Service -StartupType Disabled -Verbose

  8. The ayfie Authority Service is available from Locator 2.11. This component should not have been selected during Custom Install. If installed on the Secondary Search Server anyway, disable and stop the ayfie Authority service by executing the command in an elevated PowerShell session:

    $authorityService= Get-Service | Where {$_.DisplayName -like "ayfie Authority Service"}
$authorityService| Set-Service -StartupType Disabled -Verbose
$authorityService| ForEach-Object {Stop-Service $_.Name -Verbose}

  9. If you have completed all steps above for all search servers in the multi-server environment, including primary it's now time for configuring the SolrCloud index. See Web Server and Solr Cloud Configuration

  10. If you plan to use the search server as a fetch server as well, you need to set it up as a fetch server as well, see Installing/Configuring an Additional Fetch Server

Verify Configuration Server

  1. On the Primary or Secondary Locator Search server, open your browser and got to http://localhost:8983/solr/#/~cloud. This should now display the SolrCloud and all shards on all Locator Search Servers.
  2. On the Primary Locator server:
    1. (Optional for PostgreSQL installations) From an elevated command prompt, run %ProgramFiles%\ayfie\Locator\PostgreSQL\bin\pgAdmin3.exe
    2. Select the Locator database

    3. Select the SQL button and paste the following text into the window:

      SELECT * FROM config.via_works_server;
    4. Run the query
    5. Verify there is a second row showing the secondary Locator server (see the ADDITIONAL_COMPUTERNAME and ADDITIONAL_COMPUTER_FQHN columns).
    6. Close pgAdmin



See also





  • No labels

ayfie